双层兰奇亚斯特拉托斯展示台（1/64比例，迷你GT与热轮车系列）

Double Lancia Stratos Display Stand (1/64 scale, Mini GT & Hot Wheels)

2023-08-05 11:17:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, you can support me through Patreon: https://www.patreon.com/gigapenguin3dprints/posts

Description

The display will fit all Mini GT release of the same casting. If you want the base to fit a different casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L

The hole for tying the car might be small for Hot Wheels but I don't have the exact car for Hot Wheels to test it out.

The display base is separated into 3 parts for easy printing and colour swap. The parts are:

1) Base

Base (Slanted).STL

2) Base back wall:

FlatWall.STL
LogoPatch2.STL

3) Flat Base:

FlatBase (Slanted).STL
FlatBasePlates.STL (print x2)

4) Front Tag:

FrontTag.STL

Print Settings

Nozzle size = 0.5 mm (0.4 should be printable and likely better)
Layer height = 0.2 mm

Filament change layer for colours on "FlatWall":
1) Start (Overall background colour, mine is in white)
2) Layer 8 (Side stripes colour, mine is in green)
3) Layer 13 (Center bits stripe, mine is in red)

Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "LogoPatch2":
1) Start (Overall base colour, mine is in red)
2) Layer 8 (Overall lettering colour, mine is in white)
3) Layer 13 ("1" colour, mine is in black)

Assembly

The car is tied by wires through the hole on the flat base and then tape to the base.

Base plate should slide in nicely into the display base then the flat base plate will fit on top of it and the back wall should slide in nicely into the slot in the base.

The original packaging will just slide into the space provided in the base.

Transparent box seen in photos are Funko Pop protector box.