IKEA Skadis 挂钩板支架或固定装置

IKEA Skadis Pegboard Spacer or Mount

2023-08-05 12:50:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have the 30x22 Skadis pegboard, but the mount included has a 24" spacing. My studs are 16" and I plan to hang more than pens on it. So I created a spacer which I can run #10 wood screws through. I chose 3" long but you could get by with 2". Running #10 screws will ever so slightly thread on the spacer so you can attach it to all your desired points first by hand and then drill them straight in.

The design flairs the top and bottom out so there is more leverage against the wall, side to side is tapered just in case you mount two diagonal from one another. There are two prongs that go up into the peghole which helps center the screw and keeps the mount from twisting. Enough clearance up and down is provided (2.5mm to help assist with final leveling. The prongs sit flush with the board when inserted.

There are two different heights to give you a choice of depth. The long is for 19mm spacing while the short is for 12mm spacing (gives just enough spacing to use Skadis hooks and maintain lowest profile without marring the wall up.

I hope someone else gets some use out of it!

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Filament brand:
Prusament
Filament material:
PLA
Notes:
I set perimeters to 4 and left all stock settings for Prusament PLA. It is strong!