3D模型：AIM Solo 2 DL V2 B大小内存支架（带SUNVISOR）

AIM Solo 2 DL V2 B size RAM mount with SUNVISOR

2023-08-05 16:39:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

3D模型：AIM Solo 2 DL V2 B大小内存支架（带SUNVISOR）

Summary

A custom mount with SUNVISOR created for the AIM Solo 2 DL V2 featuring a B size ball for Ram mounts on the back. This section is fully predisposed for the insertion of a screw + self locking bolt to stiffen the structure.

The support is equipped with a sun visor. On the back there are two locations for the installation of magnets measuring 20mm x 7mm. There are two small notches on each side which allow the magnets to get stuck once they enter and never come out again.

In correspondence with the 4 threads of the AIM there are 4 holes for fixing with screws. The support has notches that allow the AIM dashboard to install in a firm way.

A protection placed on the lower part allows to protect the cables going to the hub/sensors and not to bend.