沙桥模具3D模型

Sand Bridge mould

2023-08-06 02:18:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Reminded me from the old days that I always missed the bridge over the moat* of my built sandcastle.

With this 2-piece mold and shovel for a smooth road, and a good sticking sand mix, this should be a piece of cake.

See the photo with the instructions for usage.

The Bridge Deck Scoop is also usefull to pave the road from and to the bridge… When scaling the bridge parts, don't forget to scale the scope correctly with the right factors!

The model can also be used as a viaduct by placing it between 2 ascending "roads" / ramps.

Update

Update, version 2:

By cleverly placing the lips, 1 part for both halves will suffice. So I added version 2. If you want to use this version, you have to print it twice. I made the lips a bit narrower and increased their number so that an even tighter connection is created after sliding them together. Thanks to Q_159 who took the time to contribute this clever idea in the comments section on printables!