3D打印型空气枪模具

3D Printable Airsoft Toy - Sci-fi MP5

2024-04-03 12:46:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This airsoft design uses some aspects of iozjik's smg (https://www.thingiverse.com/thing:461896)

Here is a slideshow with instructions, and materials/parts list : https://docs.google.com/presentation/d/1uYYEW2oy8IeGKDOleRtggCVgY_aYfQUDLeQsaIOGbwQ/edit?usp=sharing

Here is a youtube video :

This is a more beginner friendly approach that uses fewer parts that other designs, and is robust in construction. I printed everything out of overture super pla+, and printed the 2 main plates of the gearbox out of polycarbonate, which is more heat resistant and durable.

As of now this is full auto only!!

This Scifi Mp5 is best used in indoor maps, as it is extremely lightweight, and the lower fps ranges in indoor games means that less stress will be put on the internal parts. That being said, I ran previous designs with same gearbox design for a year straight with 375 fps and it held up fine, until the gearbox finally yielded under thermo-mechanical stresses. That gearbox was made of regular pla, not polycarbonate, so that explains it. Still, it is best to limit it to a 350 fps max. With the motor, battery, and gearset links in the google slide, 20-25 rps is acheivable, making it even better for close cqb.

Feel free to modify and remix this design. I did get a bit lazy on some parts, such as the "adapter" part not having a smooth transition to the stock. Just use sand paper for that.

Also, the adapter-backplate connection doesn't have any screws, so just glue them together. Anyways you will not need to take that section apart ever.

Enjoy!

Print Settings

Printer brand:
Sovol
Printer:
SV05
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15
Infill:
100
Filament brand:
overture
Filament color:
orange
Filament material:
super pla+
Notes:
Some parts don't need supports, some do. Small parts can be printed at higher resolution. Infill differs per part, and I explain what infill to use for each part in my youtube video (I will send link in the summary)

If you want, you can print everything in 100% infill, and that is ok. You will just be making a heavier airsoft gun, and use more material.