福特传送车手机支架

Ford Transit Phone Holder

2023-08-06 06:21:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this to fit the odd shaped hole between the speedometer and the air vent on a 2018 Ford Transit van. It should fit some other year models as well. The holder simply sits into the odd shaped hole making it secure. It will fit any phone up to 3.4 inches wide and .49 inches thick.
I have included the original .RSDOCX file in case you want to make changes to the size to accommodate different phones. The included gcode file is set to print in PETG at 40% infill and .20mm resolution.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
40%
Filament brand:
Prusament
Filament color:
Anthracite Grey
Filament material:
PETG

How I Designed This

Designed in DesignSpark Mechanical.

License

CC BY

Ford Transit Phone Holder
by musket123 is licensed under the Creative Commons - Attribution license.

福特传送车手机支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Voxelab Aquila可连接床手柄
2023-03-26
RC模漂移触摸球 - 小Z
2024-01-11
Inscryption Cards - Hueforge - Stoat
2024-01-12
阿兹姆·赫拉·艾科 Ar_4064 电线固定器 3D模型
2024-04-23
HGX lite v2支架
2025-07-18

最热下载

最新模型