DJI遥控器iPad Pro 11英寸支架

DJI Controller iPad Pro 11 Inch Holder With Wider Edges

2023-08-06 20:14:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is remix of Jacques Creton's iPad Pro 11 inch holder. In this model, i increased edges of holder significantly to hold the iPad better. Also, i increased top side aperture of holder from 7 mm to 9 mm for adding extra soft materials to not stratch the iPad. In my case, i used glued soft tape (You can also use foam or something like this) to prevent my iPad get stratched by holder. Again thank you Jacques Creton as providing step model of file. I also added here my step file for further improvements.

Print Settings

Printer brand:
Creality
Printer:
CR-6 SE
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
%20 would be enough
Filament brand:
Mikrozey
Filament material:
PLA
Notes:
Please print the model as vertical (Widest surface of holder shouldn't touch any support to get better surface. Because widest surface directly touch to iPad) (I added print preview picture)