HOTA F6 充电架站

HOTA F6 Charger Stand

2023-08-07 04:19:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I've broken the bottom angle-tab off a few too many times; so I decide a stand would be a good move. The stand sets the charger at an easy to read 15-dgree angle.

You'll need 6 x M2 8mm screws to assemble.

I'd recommend a brim for the base as there's not a huge amount of contact area. This was about a 2h 15min print on my X1C; PS 2.6 is saying 5h 40min for my old MK2.5S.