Anycubic Kobra 2 顶部安装螺旋桨承载器连接器

Anycubic Kobra 2 Top Mount Spool Holder Connector

2023-08-07 17:33:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a connector to mount the Anycubic Kobra 2 spool holder to the top instead of left side. I do not want to abandon the original spool holder, so I make use of it.

If you do not want to use the original spool holder, instead, you'd like to make it with the 2020 Reverso Context. There is a connector for you as well. I printed it with Kobra 2, it could be connected with the reverso context very tight without any bolts. But you still be able to make it tighter with some M3 bolts.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
Doesn't Matter
Supports:
No
Filament brand:
Any
Filament material:
PETG
Notes:
- Print with PETG, set 5 or more walls to enhance the strength
- Open the full_model_with_proper_printing_side.stl file, all modules could be printed with this direction without support

How I Designed This

There are 8 holes in this connector, functions as below:

Center 2 holes: Pin this connector on the top of printer, with 2 M5 15 / M5 20 bolts
Hole #3 and #6: After the original spool holder inserted into the connector, pin the "half cylinder bar" with the connector to fasten the spool holder. Will need 2 M4*(15 ~ 20) bolts and 2 M4 Hexagon nuts. (There are holes to insert the Hexagon nuts into the connector)
Hole #1 #2 #7 #8: Anything you'd like to connect to the top, just if you have M4 bolts & M4 Hexagon nuts.

You may also make use of the Filament runout detector, print out the small connector, and assemble it with the embedded M3 bolt. (You will need some 3 pins line to extend it)

Feel free to modify the f3d file to meet your bolts.