磁性Metabo HPT夹持器
Magnetic Metabo HPT Bit Holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These are bit holders designed for metabo hpt or hitachi 18v cordless drill/impact driver.
parts needed: m4x16 screw, 2 or 4 3x6mm magnets, and your choice of glue(I used super glue)
to glue the magnets in I used an Allen wrench smaller than the magnet to press it into place.
I designed these to be put on the right side of the tool if you are looking from the back of it but you can easily use the mirror function in your slicer to make it work on the left.
The 2 bit holder can be attached with the bits going horizontally to fit long bits.
The 4 bit holder holds 4 upside down so as not to dig into your hand.
I just threw this together and printed a few iterations before reaching these and they seem to work pretty good on my tools so if you have any suggestions or input please let me know. enjoy!
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Resolution:.2
- Infill:50
- Filament brand:
Kingroon
- Filament color:
tri color
- Filament material:
pla
- Notes:
this should print in the orientation it's in without supports.
I designed this to have a loose fit so it should print for anyone without issue since it relies on 3x6mm magnets to hold the bits in place.
Tags
License
Magnetic Metabo HPT Bit Holder
by ajreed09 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
塞尔达传说全尺寸大剑2023-03-26 -
Wifi Trax-WFD 30 外壳2024-01-16 -
Opel Zafira B 后退档锁 3D模型2024-04-02 -
西门子咖啡机TC-91-10-0的开关2024-04-03 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最热下载
-
Articulated Snake2024-03-30 -
远投笼2024-04-06 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15
最新模型
-
HGX lite v2支架2025-07-18 -
一体打印行星齿轮2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
为我的教学2024-05-08 -
极简浇水壶2024-05-08