螺纹槽滑动器

Spool Bin Slider

2023-08-08 17:31:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A sliding drawer utilizing an empty spool.
good for small parts and organization.

Instructions

There are 2 types, there is the static and sliding version. The Static version keeps the drawer at one side at a time while the sliding drawer is able to slide along the surface.
to build 1 level you would need to print 4 holders of any type and print its bin pair. There is 2 versions of the bin. There is the thin and thick parts. you can decide which one is best for your use case.

Attach the holder to the base of the filament spool. either any glue or for my case soldering and melting the sides and the insides.
Then you can slide the bin inside. to remove pull up the bin and it should get derailed from the railings and slide out.

The holders together might be too wide based on the accuracy of the printer. feel free to trim the edge a little bit for them to fit

Info

for some spools the inner core might be too small or too large. for the small core spools is fine as long as the holder is glued with the outer walls aligned. for the large core ones you can cut the holder to fit. (this would need to edit the model for a smaller larger core)