干燥盒线路架

Dry Box Filament Rack

2023-03-26 16:28:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

If you decide to stick with 4 rolls as shown here, you will need 16 bearings and 16 bearing sleeves. You will need 2 rail holders for the ends and two spool holders for each spool.

There is about 30mm of clearance from the floor of the box to the bottom of the bearings to put some silica beads or gel.

The holes at the bottom of the rail holders are for M3 threaded inserts to attach the assembly to the bottom of the box. You can replace that with M3 bolts and nuts as well (around 12mm long should do the trick).

If you have suggestions please comment and I will update the parts.

干燥盒线路架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载