内置AAA电池
Hardwired AAA batteries
2023-08-18 17:33:04
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Convert your AAA battery draining LED lights to a hard-wired 4.5V source! To complete the project you'll need:
- Number 4 button head screw (positive terminal)
- Number 6-32 x 3/8 Knurled Head Screw (negative terminal)
- 4.5V AC to DC converter
- DC plugs: I used 3.5x1.35mm power cables (both male and female)
- Speaker wire to solder power cables to
- Heat shrink and heat gun to properly isolate solder joints.
Also included is a mounting bracket I created to hang each light from the wall. You may need to design your own for the brand/shape you've purchased.
I recommend using a brim adhesion to help stabilize the narrow print, but it may not be required for your printer.
Print Settings
- Printer brand:
Geeetech
- Printer:
Geeetech A20T
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.2
- Infill:As desired
License
CC BY
Hardwired AAA batteries
by oranmorSM is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
10ml注射器活塞2024-05-08 -
Rancilio Silvia 58mm Portafilter Hook2024-05-08 -
卡斯特罗维亚尼亚跳蚤人2024-05-08 -
摩纳拉小玩意儿（IDK）2024-05-08 -
RC微型无人机模型2024-05-06
最热下载
-
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14
-
伊瑟宁加德骰子塔（奥斯坦克）2024-01-17 -
超越IPD板2024-05-03 -
F1赛船3D模型固定文件2024-05-08