Thrustmaster MFD 40x80 配置支架（仿生器件灵感）

Thrustmaster MFD 40x80 Profile Mount (Monstertech inspired)

2023-08-18 21:04:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Thrustmaster MFD Cougar Profile Mount

I am new to 3d printing and modelling, however with a lot of persistence and my desire to create a mount similar to the Monstertechs MFD Mount system, I present the first published revision (I made the holes slightly bigger as it was tight).

I looked around and couldn't find something which would fit my setup, as I use a keyboard tray too and mounting this on the profile directly would be in the way. So I took to monstertech for inspiration and also didn't want to pay £59 just for a piece of metal to hold it in place (more than each MFD!)

This print was designed to mount onto a Monstertech desk/rail mount (or any other 80x40 profiles), all you need is some sort of hinge (Elesa CFA.65-ERS-SH-6 is the one I use) or if you wanted you could mount it flush to your profile with an T nut insert and m5/m6 screw.

If you unscrew the original side and top screws of the MFD, then reinsert them once slid into the profile and poke the USB cable out the back (or wherever you like) then fix to your profile of choice.

Free for anyone to use, download and remix. Please do not use for Commercial purposes!

Print Settings

Printer:
BambuLabs P1S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament brand:
PLA Bambulabs
Filament color:
Black Matte
Filament material:
PLA
Notes:
Print settings;

I printed this at a 15% infill, using both a hex and Gyroid pattern with a 0.2mm first layer using a PLA Matte from Bambulabs, it took around 1h30 (Sport mode) and used 63g of Filament.

It was printed on a brand new Bambulabs P1S with AMS.

Free for anyone to use, download and remix. Please do not use for Commercial purposes!