电动牙刷架

Electric toothbrush stand with drip tray

2023-08-19 04:13:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This holds two electric toothbrushes and should fit most models. There is a small cup that prevents the toothbrushes from sliding around, and some big holes that allows water to run down the toothbrush and into the drip tray. This helps avoid gunk building up underneath and the slideable drip tray is designed for easy cleaning.

The design is minimal and functional but with enough finesse that the rest of the family is ok with it being in the bathroom :)

Print Settings

Printer:
BambuLabs P1P
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament brand:
Any
Filament color:
Any
Filament material:
PETG or PLA
Notes:
Print the holder lying down with the back towards the build plate to minimize the need for supports. A little tree support helps, but it can print ok without it as well.

The .3mf files has both objects in the right orientation. If you use the STL files, you may need to rotate the holder.
- Filament: Print in PETG to make it food safe and waterproof, but any filament should do.
- Strength: 3 top and bottom layers, 3 wall loops for strength and 15% infill.
- Finish: Use a Concentric surface pattern for the drip tray if you can, it looks neat

How I Designed This

I designed this in Onshape to fit my two Oral-B IO toothbrushes, and you can access the design directly if you want to make changes to accommodate more or fewer toothbrushes, etc.