网格构建针
Net Making Needle
2023-08-19 06:53:48
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a set of 2 needles for making nets. There is a 6 inch and 10 inch version.
The larger one is based on the needles we used to make fishing nets and crab nets.
I use the smaller ones to make the netting part of dreamcatchers.
They both print well without any supports.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Plus
- Rafts:Doesn't Matter
- Supports:No
- Resolution:.20 mm
- Infill:40%
- Notes:
I printed this in PLA with .2mm layers and 40 percent infill. You can adjust the infill to make it more or less stiff. I think .3mm layers would be fine as well.
License
CC BY
Net Making Needle
by oaklea is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
带耳或不带耳箭尾扣位2024-05-08 -
沃尔芬（星狐零）模型2024-05-08 -
魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换2024-05-08 -
贾瓦人持UZI2024-05-06 -
三菱迷你分体机遥控器2024-05-06
最热下载
-
Queen Anne Revenge 船2023-03-26 -
模块化抽屉 2.02023-03-26 -
桌子反面的抽屉2023-03-26 -
浴室排水器2024-04-07
