RDQ源一号街头联盟规格版打印物

RDQ Source One V3 Street League Spec Prints

2023-08-19 10:13:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here are my street league prints.

Mine needed about 80g of weight added to pass the 1280g spec when printed at 50% infill with 4 walls plus alternating extra wall.

Shell fits Foxeer Razer Nano camera.

Arm covers fit Brotherhobby Avenger 2808.

The fin/top plate cover is designed to hold up to 14 of these sinkers. Use the spacer and scale to fit to take up the extra room. I used a strip of gorilla tape to stop the sinkers from wearing against the top plate.
https://www.amazon.com/gp/product/B09P1H1B2D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1&psc=1

The 20X20 Mount To 30X30 Stack lets you use the 20x20 holes to mount a 30x30 stack so you do not need to mess with the stack screws when swapping arms.

Battery box fits CNHL 5S 2200mah with room for balance leads to be shoved in. It should be printed standing on the closed end with supports only on the tabs, I used a 20mm brim to help with bed adhesion. The added venturis and channels help keep battery cooler. It makes a little difference, but the battery still gets pretty warm.