反弹伙伴

Bounce Buddy

2023-06-25 19:39:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

He might look familiar, and yes, because the inspiration for this project comes from 1960 where Hans Gustav Ehrenreich - a danish woodworker (or tree turner as called back then)
created the first prototypes, Bimble and Bumble. Today the series is called Hoptimist, and you can be sure there will be one fitting for your home. What I personally like about Hans Gustav Ehrenreich's design is, that not only is the Hoptimist cute to look at, he is also interactive. You need a Hoptimist in your life.

While you make

Print Settings

Printer brand:
Longer
Printer:
Longer LK5 Pro
Rafts:
Yes
Supports:
No
Infill:
30-40%
Filament brand:
Cheap Amazon
Filament material:
PLA
Notes:
Attention

The more infill you give the Bounce Buddy, the heavier he will be. That matters, because you want to have some weight on the spring, to make it bounce more.

Spring

Print the spring separately, turn it 90 degrees, and give it full support.
Infill - 85%
Support - Yes (remove the support in the middle of the spring)

Eyes

Print separately
Infill - 100%
Support - no
Glue to head