比格斯·班尼：我的蛛网伙伴
Bugs Bunny - Goes with my Gossamer
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is the companion piece to my Gossamer Looney Tunes monster. Print a little slower, as it's smaller and detailed. I printed the nose at .12 layer because it's so small, but everything else was printed at .2. Check the notes on the individual parts. I sliced with Cura 5.6 and used tree supports touching the buildplate to minimize scarring. I used some stock silk silver PLA for the gray parts; Inland white PLA+ , Sunlu Pink Meta for the ears, and some spare Inland silk pink for the nose.
Print Settings
- Printer brand:
Creality
- Printer:
CR-6 SE
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:20%
- Filament brand:
Sunlu/Inland
- Filament color:
Multiple
- Filament material:
PLA/Silk PLA
- Notes:
Use tree support only from the build plate for best results. Print the body and head vertically for minimal scarring. Print the white body piece facing up to hide any scarring there. I printed the nose at .12 because it was so small.
Tags
License
Bugs Bunny - Goes with my Gossamer
by arpboy is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Wled控制器箱2023-08-25 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03 -
头发修剪架2024-01-10
最热下载
-
Makita 10.8V 钻具与电池组2023-04-07 -
佳能EOS镜头连接接口2024-01-11 -
硫化机模型2024-04-13 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
HGX lite v2支架2025-07-18 -
弹弓HGX-FRAME V1A2025-07-18 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15