安装翼型夹具
Mounting Wing bracket
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Under table mounting bracket shelf for equipment, like computer docking station, switches, mini KVMs.
It was designed to hold a Dell D6000 docking station and a mini KVM.
Height of the top shelf: 37mm
Height of the bottom shelf: 30 mm
Depth of the shelf: 80 mm
Since it is not a full shelf, just wings, you can use it for any device length.Including the FreeCAD file, so you can alter it as it would suit you.
Print Settings
- Printer brand:
FlashForge
- Printer:
Foto 8.9
- Rafts:No
- Supports:No
- Notes:
I've printed it with a standard grey resin on my Foto 8.9, but it should print fine on any filament printer, like the Ender 3 v2.
Post-Printing
License
Mounting Wing bracket
by Wynthos is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Delta设置校准为Klipper2023-04-23 -
ID-O-MATIC IV 重复器控制器外壳2024-01-13 -
凯撒 M3 智能自行车2024-03-23 -
Morph Umarex Long 110弹珠地堡3D模型2024-04-12
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
30.5mm到25mm转换板（用于飞行控制器堆叠结构）2023-04-03 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
厨房水槽滤网过滤器2025-06-05 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
兔女郎半身像2025-07-15 -
私密羞羞娱乐骰子2025-07-15 -
原神优菈2025-06-27 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24