Differential for Chasis 1/10 Adaptable - DKS-Basic

2024-05-08 09:43:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Differential for Chasis 1/10 Adaptable - DKS-Basic

Summary

This is a remix from the Open RC Differential form tahustvedt to be used on the DukeDoks RC chasis
https://www.thingiverse.com/thing:2361718
https://www.thingiverse.com/thing:4892947
All the pieces that you need to prin are here, you need a new:
Shaft
Weel
Differential(replaces the gear)
A new nut for the wheel

You will need 3 more ball bearings, the same ones that you used on the front wheel, two for the wheel and one for the main gear of the Differential.
For the small gears of the Differential, use a piece of filament, check the original Differential for guide (https://www.thingiverse.com/thing:2361718)
There are two nuts to print, one easy to print, that is the origial frrm the open rc diff, and one with the same pattern from dukedoks, but it will require suport to print. Appart from that, the only thing that needs support is the wheel, that should be printed with the gear on top.
I also include a wheel to use bike inner tube, it has better grip than one made with TPU
Just let me know if you have any doubts