HP 1810-24G v2 (J9803A) Rack Mount Bracket

2023-08-19 21:20:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

HP 1810-24G v2 (J9803A) Rack Mount Bracket

Summary

19" rack mount brackets for a HP 1810-24G v2 (J9803A) networks switch. The model needs to be rotated in the slicer, preferably with the front side facing downwards. The model will tolerate some tolerances introduced by imperfect printer/sliver setups.

The eight M4 x 6mm screws are not included, use regular M4 screws (I also recommend the use of washers). HP recommends screws with a length of 6mm, use longer screws at your own risk.

The photographs show the 1810-24G v2 (J9803A) sitting on top of a HP 1820-48G (J9981A), just for reference. The brackets will not fit the 1820-48G (J9981A)! Note that both switches are just decoration; they will not come out of your 3D printer!

There are two STL files, one with three M& screw holes (as seen on the photographs; very uncommon, although some non-standard racks might ask for the centered hole) and the other one with the usual two M6 screw holes.

The brackets are not designed to carry the weight of the switch. I recommend to have the switch sitting on some other equipment, not hanging totally suspended in the air. While my brackets are capable of carrying the weight of the switch, external factors (heat, vibration, shock, a beer crate on top the switch, etc. pp.) could cause catastrophic failure. Note that you will need two brackets, of course.

Also included is the SCAD script, hopefully with enough comments to allow for reasonably easy customization.