华硕旗舰版 X670P 垂直设计 M.2 E 键支架

Asus Prime X670-P vertical M.2 Key E bracket

2023-08-19 23:21:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Asus PRIME X670-P requires a special mounting bracket to vertically mount a WiFi card. While the manual states "The M.2 Wi-Fi module and vertical M.2 Key E bracket set are purchased separately.", it can (currently) not be purchased.

To mount a Intel AX210 (without an additional PCIe adapter card), a simple bracket was designed. It requires:

Intel AX210 (or similar sized card - like the AC 7265 in the pictures)
2x MHF4-to-RP-SMA pigtail
2x M2.5x6 screws (to attach the bracket to the mainboard)
1x M2.5x8 screw (to attach the M.2 card to the bracket)
3x M2.5 nuts

The easiest way to install the card is to perform following steps while the mainboard is not yet installed in a case:

put M2.5x6 screws through the lower mounting holes
attach 2x MHF4-to-RP-SMA pigtail to the sidewall (including nuts)
put M2.5x8 screw through the top hole
put Intel AX210 between top screw and the mounting bracket and fixate it using one M2.5 nut
put bracket with AX210 in the right place on the mainboard and attach M2.5 nuts on the mounting screws
attach pigtails to MHF4 socket
put mainboard in case
attach antennas

There is also a version without (RP-)SMA mounting sidewall - which was not used at the end but might still be useful for some persons.