车床凿子磨削架

Lathe Chisel Sharpening Jig

2023-08-20 07:49:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is still a bit of a work in progress but so far it has been working fine for me.

It is a jig to use on a Grizzly Variable Speed Wet Sharpener, but it might work on others of the same style. The shaft to mount this on the Grizzly is slightly under 1/2" (15/32").
The inserts are designed for Wen lathe chisels (1" roughing gouge, 1/2" and 3/8" spindle gouges). With a bit of adjustment, I would expect them to work with other makes.

In addition to the printed parts, you will need 2 M6x30mm long and 2 M6x20mm long Hex Socket Head Cap Screws as well as 1- M6 hex nut and 3 M6 threaded brass inserts.

The inserts might need light sanding and rotating them in the holder for a bit to get the fit right. I printed them in PETG but I don't think it really matters what you use as long as it is slightly flexible. I used some supports mostly for the holes and a slight overhang on the inserts. The photos show the orientation that I printed them.

I'll have tried to include enough pictures to show how they go together and fit on the sharpener. Once mounted to the proper angle to sharpen, you simply rotate the chisel handle back and forth against the grinding wheel.