超大型格里利小型车床手柄

Oversized Grizzly Mini Lathe Handle

2024-04-28 16:07:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Oversized free spinning mini lathe handle for all three handwheel handles on Grizzly G0745 or Seig C0 or other branded lathes.

45mm Length handle
100% Infill
.2 quality

I created this to have the original M4 size handle bolt tightly fitted into the base from the top. Then push the base with bolt inserted into the top of the handle sleeve. Then screw the oversized handle on the handwheel.

Pro Tips:

Original handle bolt is inserted without stock metal sleeve.
M4 Handle bolt is a sung fit.
Sleeve has a 1mm space for left and right play for an easy spin when rotating.
Try using a heat gun to tap the bolt in the base so it does not split as its a snug fit.
Try sanding the base with 3000 grit sandpaper to ensure a very nice spin when rotating handle