Bambu实验室热端喷嘴

Bambu Lab Hot End Nozzle

2023-08-20 08:41:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have always thought that the Bambu Lab Hot Ends are quite a nice design. I decided to try modelling one to work on my skills in F360, and thus this model was created.

I measured and modelled a 0.6 hardened steel hot end as near as I could, with a few compromises done to assist in making it printable. Attached are step and stl versions of all the different parts. Everything is modelled at nominal, so the fitment of the pieces together are up to you to do in your slicer. Reductions of outer contours of 0.1mm worked fairly reliably for me, but it will depend on a million things...

I printed a version at 800% and it is awesome! I have one at closer to 500% and the lettering got a bit small (mostly because I was too lazy to swap in my 0.4 nozzle just for a few letters). This was printed without an AMS unit - can't speak to how this would work using an AMS, as I do not have one.

Also included is a hanger that slots into the rear channel for the wiring. Makes for a nice wall display.