Finger Tab for Barebow Archery
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
3D printed insert for DIY leather finger tab for barebow archery.
Ideally print in two colors (by changing to a new filament color for the last several layers).
The model is provided in six variants: right hand and left hand versions of 3 different sizes.
If you want to rescale the model, choose a smaller model and scale it up, rather than scaling a larger model down. If you scale down, you are risking to make the lines too narrow, and they will not print well. Also, the holes for stitching will become too small.
After printing, use a 1.5 mm (or 1/16") drill bit to clean up the stitch holes.
Use an awl, two needles and a waxed thread to stitch the scale to the leather part.
Trim the leather part to your own shape of the fingers. Search for a video "trim finger tab".
More information, as well as download of Fusion 360 and STEP files.
Tags
License
Finger Tab for Barebow Archery
by agenkin is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
Prime Line C1254 阳台门钥匙锁稳定器2024-05-08 -
水元素精灵2024-05-08 -
适用于 1:10 模型的 DKS-Basic 轮毂2024-05-08 -
50公斤重量传感器支架2024-05-08 -
CQC 6XX耳机改装模型2024-05-08
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
红眼鳄鱼蜥蜴可拼合骨架3D模型2023-03-26 -
原始控制舱2024-03-25 -
线框无心2024-05-08
