Bernina 730 直削垂直凸面齿轮

Bernina 730 Record Straight cut Vertical bevel top gear

2023-08-21 02:16:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These gears are unobtainable now as far as I know. One variant has a 12.2 mm centre hole, it will press onto the steel centre piece from the original ( broken) gear which has a spline on it. No need to pre-heat or use any glue, I did mine carefully in a vice. I I reccomend printing as a solid object with 100% infill in PLA+. The second variant has a small hole the same size as the Bernina shaft, this can be imported to TinkerCAD and you can put in whatever size hole you want but I found 12.2mm to work well. This is a rework of a gear for a 500/600 series Bernina created by Tictactus, big thanks as he has done all the hard work of the gear teeth.