宜家 SKÅDIS 木板挂钩
IKEA SKÅDIS Board Hook
2023-08-21 04:16:48
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a simple hook made to work with IKEA SKÅDIS boards.
The hook has no purpose as is, but is made to be built upon for your own creations.
The model file is for Fusion 360 (F3D), but 3MF-files are also available.
Customize
If using the Fusion 360 file, there will be a couple of parameters to use:
- "HookWidth". This is the width of the hook. The holes on the SKÅDIS board are generally 5mm in width, but this parameter is set to 4,75mm. Change it if it doesn't fit like you'd like.
- "HookQuantity". This is the quantity of hooks to be used. I recommend at least two hooks to be used if the mount is going to be big enough for it, or if it is going to
When printing models with these hooks, and if you have not managed to make the part printable without supports, I recommend you to use tree supports instead of normal.
Tags
License
CC BY
IKEA SKÅDIS Board Hook (for your own creations)
by Hopefully_Helpful is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Peugeot 2008 iPhone Magsafe Holder2023-06-19 -
ESP8266与OLED 1306案例分析2023-09-16 -
2024 FRC 注牌耳环2024-03-30 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最热下载
-
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
7英寸HDMI显示器-B外壳2024-04-01 -
Arduino或5V继电器控制板固定架2024-04-02 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
最新模型
-
Pokemon Go 社区日第86次 # Bounsweet 鸣泉2024-05-08 -
简约墙面键帽展示架2024-05-08 -
小号夹子 第三调音滑块2024-05-06 -
Quadlock 桌下手机固定器2024-05-06 -
欧乐B牙刷架，适合两支牙刷2024-05-06