购物车芯片

(breakable) Shoppingcard Chip / Einkaufswagenchip

2023-08-21 04:43:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Most shopping cards are possible to unlock with "put in - put out" but sometimes the "loading" is sideways, so it needed a coin.

A reusable solution is here: https://www.thingiverse.com/thing:3449904
But I prefer a small solution that only becomes a cap in an emergency, in which case I would then reprint it afterwards.

For best "round" coins it is necessary to print the coin and the mount layer separately but beside. So, I added divided parts separately.
In the .m3f version for PrusaSlicer I also shorted the "bridge"-part on the mount for better breakings.
For best results I recommend importing the 3mf project.