旋转唱片架 - 短杆设计专为Elegoo Saturn优化
NOW PLAYING Vinyl Record Stand - with poles shortened for Elegoo Saturn
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A slight remix where I have shortened the pole by 4cm to fit the width of the print plate of the Elegoo Saturn.
I printed everything solid and flat to the plate.
I used auto-light supports.
If you use Lychee Slicer, I recommend turning on the 'Adaptive Base' option for the support bases to avoid merging them with the print. I've included a screenshot of where to find that setting.
I did have to sand down the pole connectors a little bit to get them into the slots on the stand, as it is a tight fit. You could decrease the size of the poles to 98% when printing.
Print takes 2 hours.
Print Settings
- Printer brand:
ELEGOO
- Printer:
ELEGOO SATURN
- Rafts:No
- Supports:Yes
- Resolution:0.05
- Infill:Solid
- Filament brand:
Elegoo
- Filament material:
Standard Photopolymer Resin
License
NOW PLAYING Vinyl Record Stand - with poles shortened for Elegoo Saturn
by pixelscol is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
心形花瓶 Mother's Day 特别版2024-05-08 -
3D美国国旗模型2024-05-08 -
SSR 衬套盖2024-05-08 -
Oral-B双齿夹持器3D模型2024-05-06 -
专业版船速超跑发动机性能部件2024-05-06
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
ToyREP 3D 打印机2023-03-26 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21
