狗用装备 AirTag智能追踪装置

Dog harness AirTag holder

2023-08-24 01:37:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

狗用装备 AirTag智能追踪装置

狗用装备 AirTag智能追踪装置

Summary

AirTag holder for dog harness/collar.
Corners are rounded to prevent pet discomfort.
Clips for convenience and ease of use.

Harness itself goes between bottom piece and air tag, and cap closes everything like a sandwich.

Dimensions:
38x40x15mm

Max harness width is 26mm (fits Zeedog H-harness Large)

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
Yes
Resolution:
.2 mm
Infill:
15% Gyroid
Filament brand:
Monofilament
Filament color:
Black
Filament material:
PLA
Notes:
Supports needed only for the clips themselves - otherwise they lose shape and don't clip together. For that i set Support overhang angle to 70%.

Print time at 150 mm/s was 1h.
12g (4.07m) of 1.75 filament

Design accounts for .3mm of tolerance.

Using AC Kobra 2 actually, its just not on the list.

Did not conduct any serious load testing with this thing, but i was unable to tear it into two, which is good enough for me.

Tags

airtag airtag holder apple airtag dog Dog collar dog leash

License

CC BY

Dog harness AirTag holder
by dronegobrr is licensed under the Creative Commons - Attribution license.

狗用装备 AirTag智能追踪装置

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型