可堆叠、可滑动的小盒子
Stackable Slidable Boxes o' Bitses
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a series of stackable and slidable boxes I made. Each one can slide into each other.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Pro
- Rafts:No
- Supports:Yes
- Resolution:0.2mm
- Infill:15%
- Filament brand:
PLA Max
- Filament color:
Marble
- Filament material:
PLA+
- Notes:
These are boxes that are endless stackable. They have thick rails for the sliding mechanism as I noticed similar boxes had pretty thin rails. I use them to hold board game bits but they can be used for anything and can be scaled up or down.
I printed these with a brim since the corners were warping. This might happen to you even with dialed-in settings due to the nature of the corners/overhangs that allow these to slide into one another.
The tolerances are good but you may need to slide each piece back-and-forth a few times to scrape off any excess filament build up.
I included a lid with no text as well.
Tags
License
Stackable Slidable Boxes o' Bitses
by Zippy11 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
最新模型
-
10ml注射器活塞2024-05-08 -
核战末日保险库 - 饮品托盘标志2024-05-08 -
垂直货架固定支架2024-05-08 -
偏移适配器 for BTT SKR 3 EZ on Ender 5 Plus2024-05-08 -
3D模型 GTX 750 GIGABYTE2024-05-06
最热下载
-
桌子反面的抽屉2023-03-26 -
Kumonga的孩子与澳大利亚蜘蛛驯兽队2024-03-17 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
史诗级生存刀具2024-05-03
