乐高保时捷911 RSR 42096壁挂式水平架设
Lego Porsche 911 RSR 42096 Horizontal Wall Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a horizontal wall mount for the Lego Technic Porsche 911 RSR model # 42096. There are other wall mounts which hold it vertically, which I don't think looks as nice as horizontal.
It holds the car roughly in the center of the model under the seats/cabin - it should be pretty easy to figure out. The mount will hold the car in an earthquake, assuming the wall stays up. You have to put in a bit of pressure to "snap" it into place.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Doesn't Matter
- Supports:Yes
- Notes:
Needs support "everywhere" to print the tabs that hold it. They were somewhat difficult to remove but it got the job done.
Tags
License
Lego Porsche 911 RSR 42096 Horizontal Wall Mount
by Only1Hockeytown is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Voxelab Aquila可连接床手柄2023-03-26 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
RC模漂移触摸球 - 小Z2024-01-11 -
Inscryption Cards - Hueforge - Stoat2024-01-12 -
HGX lite v2支架2025-07-18
最热下载
-
Valorant 杰特的姿态2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
HGX lite v2支架2025-07-18
-
3d打印的男人凉鞋2025-07-17 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
坏龙家的大宝贝女生别下2025-06-26