破碎点存储箱
Star Wars Shatterpoint Unit Bin
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
UPDATE 10/15/23:
Hey all, I've gotten some awesome feedback on these, So I've made some major changes and fixes. The new changes are different enough, and benefit travel more than regular storage, so I've decided to break the project into 2: Travel and Storage.
Storage Bin:
- Basically, the same as the original
- Made 10mm taller to accommodate taller minis
- Made 5 variants for any combination of 50mm and 40mm bases
Travel:
- Larger footprint to accommodate unit card storage
- Removable base insert for easy swapping
- Simply place a metal plate under the base insert to take use of magnetized minis
Images: Travel bin in silver, storage bin in red (the storage bin is an older iteration, the new one is 10mm taller, just haven't printed it yet)
A quick note about the new travel bin. While the intent is to be able to fit a metal plate under the minis to be magnetized, I had a shockingly hard time finding a good metal plate that fits the bill. I was able to pick up a 12"x12" plate from Home Depot and cut/sand it to size, but if you aren't handy like that, I found a tie plate also from Home Depot for about 98 cents that doesn't fit perfect, but should work in a pinch. It's also worth noting that you'll want the plate to sit above the cards, as even 3 unit cards between the plate and the magnets are enough to render the magnetic hold pretty much nonexistent.
These are a handy little storage solution for squads of Shatterpoint minis! they have a fun little window so you can see your hard work while it's on the shelf, though I do recommend a brighter filament color if you want your minis to stand out. I've been working on this for a couple months since the game came out, loosely based on a unit bin I used for Star Wars: Legion. The lid should be a snug fit and not slip out, and the miniatures should fit in comfortably. Please, let me know how they work for you all, and if there's any design tweaks you'd like to see! I just want them to be the best and most useful bins they can be!
Print Settings
- Printer:
Bambu Labs X1 Carbon
- Rafts:Doesn't Matter
- Supports:No
- Resolution:Any
- Infill:20%
- Filament brand:
Hatchbox
- Filament color:
Any
- Filament material:
PLA
- Notes:
Make sure your bridging settings are dialed in
Tags
License
Star Wars Shatterpoint Unit Bin
by demio4 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
最新模型
-
盖子和汽油喷嘴2024-05-08
-
Moulinex 多核处理器2024-05-08
-
Taco Bell国际象棋:车棋2024-05-08
-
无线电删除板2024-05-06
-
行走者之车曲奇切割器2024-05-06
最热下载
-
Gyro Air旋转空气模型2023-03-26
-
3D机器人手臂模型2023-03-26
-
罗宾:不公正22024-04-07
-
基础鸟饲料架2024-04-30
-
P90 AEG型号空气枪到Odin Airsoft速率加载器适配器2024-05-01