放大版飞机模型绘画台/临时支撑架

Scale Model Airplane - Painting Stand / Jig

2023-08-24 19:59:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Please note that this design is no longer available here.

It is now available on cults3d.com

Cults3d supports my work and is independent of a printer manufacturing company.

Thank you and happy Printing.

This is a fully adjustable stand for painting scale model airplanes. It can accommodate model planes in 1/72 and 1/48 scale (probably 1/32 too, but I could not test it).

Adjustments include:

Lenght of the 3 axis.
Position, angle, height of the vertical heads.

I tried to keep the overal height of the stand low, so that I can use it inside my spray booth without issues. If you need more height, you can use the "XL" version of the axis.

Furthermore, the 3 heads can be rotaded by 180 degres so that you can use the landing gear bays of the the model plane as contact points to the stand.

As a bonus, the base was designed to fit snuggly on the small turntable that is usually included with paint booths.

Working Dimensions:
Length (for each of the 3 axis): 0mm - 115mm
Height: 58mm - 83mm
Height (XL axis): 73mm - 98mm

The dimensions of the triscele base were chosen because it is near the maximum my 3D printer can handle.