花瓶设计0131

Vase 0131

2023-08-25 03:11:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This pen, or anything else, cup has a large side and a small side.
It can be printed in vase mode, or spiralize outer contour in cura, or printed in normal mode. The photo shows the vase printed with 2 walls in normal mode. You can uncheck spiralize outer contour to print in normal mode, set top layers to 0, set infill to 0%. Bottom layers set to 3 or more. Set walls to 1 or 2 or more for a more sturdy vase if not in vase mode. Can be scaled to fit your needs. The vase in the photo shows vase not scaled at 100% of the stl file at 102mm wide for X and Y is 120mm and Z is 110mm tall. It has not been tested for being watertight and probably isn't printed in vase mode. If you make it, please post a photo, I'd like to see your print!

All my designs have a copyright, you may not download and sell them.

Tips are appreciated!

Enjoy...

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
0
Filament brand:
any
Filament color:
any
Filament material:
pla
Notes:
The stl file is NOT hollow. Be sure and check your slicer for printing a hollow vase.

Designed using Fusion360