齿轮型扳手收纳架

Sawtooth Wrench Organizer, Extensible

2023-08-25 17:33:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The original model works pretty well, but there are a couple of things that I decided I wanted to tweak for QoL purposes. :)

Namely, I felt that the tolerance of the connection could be tightened; some of the fin could be chopped-off to reduce height, weight, and filament usage without compromising ability to hold wrenches; and, the base of the model could be widened to reduce the possibility of it tipping over. Before, the pieces didn't connect very snugly together, and they had a tendency to topple over sideways without a wrench to hold them steady. I rambled a little more about this on my Make of the original model, but I'll just keep it short and sweet, here.

I did it kinda quick in Blender and only had so much time to work on it, though, so please don't judge too harshly on some of the little flaws.. They don't really show up in the final print, anyway - they just might look a little weird in the slicer, or something. I tried to smooth 'em out, best I could, with my limited skillset and time.

Of course, I wouldn't have made it without the original design provided by BradIdeas! Thanks for the model :D

Edit: Someone who did a Make of the original model mentioned that they would have liked an "end piece" that doesn't include the male connector on it. So, I went ahead and added one for my remix. c:

Cross-posts: Printables, Cults3D

Print Settings

Printer brand:
Creality
Printer:
Ender-6
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
35% Lightning
Filament brand:
eSun
Filament color:
white
Filament material:
PLA+
Notes:
Shouldn't require any special treatment. Just make sure your printer and slicing settings can handle the "bridge" that makes up the top part of the female end of the connection!