Ender 3 S1 USB LED建造板灯
Ender 3 s1 USB LED build plate light
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Uses a Yitee USB Keychain light. Lite version uses less filament but will flex when adjusting LED brightness. More support version uses more filament but mounts flush against the x axis bar.
You'll also need a sacrifical USB cable to solder to the Yitee LED's leads.
Requires no extra hardware, mounts using existing bolts.
Provides excellent build plate lighting, and is helpful when troubleshooting first layer issues or calibrating z offset of a nozzle.
I just remixed this to adapt it to the s1. Credits to the original creator for the great design - https://www.thingiverse.com/vl4dt3p3s
Tags
License
Ender 3 s1 USB LED build plate light
by Richardfranks is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
最新模型
-
指尖把玩2024-05-08 -
绘画棒键盘支架（适用于Steam Deck）2024-05-06 -
X轴清洁：Prussa/Mendel打印机维护技巧2024-05-06 -
魔幻蘑菇202024-05-06 -
迷你R50 DIY收音机2024-05-06
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可打印骰子塔2023-03-26 -
俄亥俄州日全食针孔观察器2024-05-03
