1997年日产HIJET S110P版Dash 3D扫描模型

'97 Diahatsu Hijet S110P Dash 3D Scan

2023-08-25 17:34:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here is a set of simplified meshes of the dash of the '97 Diahatsu Hijet S110P. These are cleaned up and simplified meshes, I had to perform quite a bit of post processing since the source files were hundreds of megabytes. I used MeshLab to clean them up using the “Surface Reconstruction: Screened Poisson” feature to turn the broken surface and point cloud into a watertight mesh. I did cover all clear and glossy surfaces with painters tape, so there are some creases. Overall the data is good and the couple test prints that I have done fit.

I am planning to use these surfaces to model several accessories for the truck, like gauge clusters, phone mounts, speaker boxes, etc…

I am still learning to work with meshes in Fusion360 so I haven't made much progress. I figured I should post these and see what items others come up with.

I do have the original files if you want to have a go with converting them, just send me a message and we can figure out how to share them.

Scanned using a Hexagon Absolute Arm 85