1997款日产HIJET S110P车载手机支架

'97 Diahatsu Hijet S110P Dash Phone Mount

2023-08-25 17:34:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I created this phone mount base for a phone mount that I bought, since the original clamp mechanism didn't clip on my dash properly. This base is made to fit into the rightmost dash bolt hole. Just remove the cover and the M6 screw. Disassemble the dash clip and screw down to the top of the 3d print. Install the base and the top assembly, secure with a M6x30mm button head screw.

I split the model into two pieces since I didn't have good supports on PC or ABS. These parts can be printed without supports (a brim may be needed).

Make sure to print with a high temp material to keep the parts from warping in the sun.

This is the phone mount that I bought originally, it is reasonable quality and is fairly cheap. I want to design a better mount but this works for now.
amazon.com/dp/B0C2NFY5Y5