奥尔克光盒 3D模型

Ork Lightbox

2023-08-25 17:34:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Another lightbox, this time by request for the Orks. I haven't printed this one but it's built the same way as all the others that have printed perfectly. I considered putting a heat insert retention peg in this one as well, but I'm pretty sure the geometry of it will provide a very nice friction fit.

If you think it needs this, I can add it in and add a new variant. It'd be in the big eye, similar to how the Krieg box has the peg in the nose.

All the same bits and pieces and process as used in the Necron lightbox, check it out for details.

The "Orks Lightbox.3mf" file is a Bambu Studio 1.7.4 project file with all the settings I would use to print this at (the proven settings from all the others). The other two are simple geometry from Fusion.

UPDATE: I had a really good idea for a joke that involved color-changing LEDs, so I made a new version of the base that includes a mounting point for a torn-apart SP110E controller that would run WS2812B LEDs. This is added as "Orks v2 base (SP110E).3mf" and is just the geometry file.