Ender 3 X轴摄像头支架
Ender 3 X-Axis Camera Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is an X-Axis mount for Ender 3 & Ender 3 style printers. It goes directly before the nut, like a washer. This area is scooped and only 1mm thick in order to not interfere much. The plate design is versatile for any square / rectangle PCB style cameras. You can certainly make small pre-drill holes and screw your camera in if you would like. I use double sided tape. You can see the nozzle tip. In my timelapse example it may not be apparent because I have the nozzle tip quite close to the end of the silicone sock, and I am also using the MiniMe v4 hotend.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:No
- Resolution:0.12
- Infill:Gyroid @ 50%
- Filament brand:
Doesn't Matter
- Filament color:
Doesn't Matter
- Filament material:
Doesn't Matter
- Notes:
You can print at lower resolutions and less infill, but the cost and time saving benefit is very minimal for the structure changes.
Post-Printing
Tags
License
Ender 3 X-Axis Camera Mount
by kyleyannelli is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
RecRoom标志2023-05-19 -
仿生蝗虫翅膀设计：用于微型无人机2024-01-03 -
隐藏式挂钩架2024-02-06 -
乒乓球无气2024-04-22 -
多板结构胶带夹持器2024-04-30
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
罗宾：不公正22024-04-07 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最新模型
-
苍井空老师全身像苍井空跪姿2025-06-27 -
Dwarven Forge Forest Tile Tray2024-05-08 -
MW4 Madcat MKII 3D模型2024-05-08 -
狗宝宝猴子2024-05-08 -
BabyBuddha哺乳器支撑架2024-05-06