环形电机四号强力飞行推进器
Toroidal Rotor 4 Strong Flying Propeller
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
这是我飞行器玩具的一个简短改编版：)
If you like my design please share your experience on: https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller
My first ones still last strong but everyone is talking about toroidal rotors.
nI really like this design and I think it fits this application very well!
But try it out yourself!
I uploaded 4 Versions â 45° Angle to print with a 0,4 or 0,6 mm Nozzle.
The bigger props will obviously have more lift but the smaller ones are cool too :D
Have fun and keep printin!
As with the original Version I prefer stiff, light and robust materials for these rotors. I print them with PA6CF Filament. But everything else will work too.
Original Version:
https://www.thingiverse.com/thing:5413706
Printing Tipp:
Locate the seams at the center piece to get a good airflow and connection between the connection points .)
Update 28.02.2023
I deleted the 50° Angled models since the 45° ones print just fine :) I also added 2 smaller propeller to print with a 0,4/ 0,6 mm Nozzle :)
环形电机四号强力飞行推进器相关内容
猜你喜欢
联系我们
热门推荐
-
3D物理引擎基础模块2024-01-15 -
Wifi Trax-WFD 30 外壳2024-01-16 -
Galaxy折叠手机系列4/5控制器适配器3D模型2024-03-21 -
Z轴偏移测试2024-03-28 -
ICTA D20毫米电气导线出口板2024-05-03
最热下载
-
斯坦利杯2024-01-11 -
Wolf系列手机支架2025-07-16 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
基础鸟饲料架2024-04-30 -
俄亥俄州日全食针孔观察器2024-05-03
最新模型
-
指尖把玩2024-05-08 -
创实 Ender-3s1 Y轴电机支架2024-05-08 -
Taco Bell国际象棋：车棋2024-05-08 -
ABS 1.5英寸盖2024-05-08 -
汤马霍克 ASG32 4.44米 42毫米鼻部切割模板2024-05-06