RC无边框气垫船——圆形外缘推进器
RC Skirtless Hovercraft - Rounded Peripheral Jet
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A smooth rounded ramp for the peripheral jet. Shows VASTLY increased performance vs the hard slot design when tested at the same weight of craft.
The hard slot is still lighter overall so this printed ramp is beneficial if the weight is kept down.
Print as light as possible - excess weight may reduce the performance below the hard slot
I've successfully printed 0.4 walls / 0.4 nozzle up to 150mm length on an i3 Mega S.
Corners needed 0.6 walls / 0.4 nozzle. Remember one of the corner bits needs mirrored!
"closed end" may help if you have real problems with bed adhesion or want a more rigid section.
Print Settings
- Printer brand:
Anycubic
- Printer:
i3 Mega S/Pro
- Rafts:Yes
- Supports:No
- Resolution:0.2
- Filament brand:
RS PRO
- Filament material:
PLA
- Notes:
Suggest raft. Brim is difficult to separate without damaging the end of the section.
License
RC Skirtless Hovercraft - Rounded Peripheral Jet
by Glydaire_Prints is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
esk8电动滑板电池容器电池托盘3D模型2023-03-26 -
星际迷航DS9/Voyager风格三维仪器2023-03-26 -
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝2024-04-05 -
刀之站立2024-04-16 -
巨魔头像 012024-04-21
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
HGX lite v2支架2025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
裸女站立2025-07-16 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16