APS CRS M4电池盖更换

APS CRS M4 - Battery Cover replacement

2024-03-30 14:08:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hi!

This is a replacement battery cover for the APS CRS (Collapsible Rifle Stock) M4. The Cover will snap into the Stocktube on one end, the other end functions as a joint for opening/closing.

The bolt and nut do work, but they're to be seen as temporary fix, especially the nut is so delicate that I can't guarantee it will hold up very long. After printing, you should take a steel M4 Screw and Nut and CAREFULLY screw them into/onto the printed parts to give the printed threads a better shape and make them work properly.

Print the battery cover standing with paint on supports as shown in the picture. you do not need to, but I advise you to also support the upper part to give the print some stability during printing.