带状锯木机护栏指示手册

Band Saw Fence Indicator Guide

2023-08-26 21:02:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

BAND SAW FENCE INDICATOR

A replacement indicator for a bandsaw or other tool that has a similar guide. Simply screw it on with the screw that came with your bandsaw. I recommend a 20% infill. PLA is fine. PETG would be better on a heavily used bandsaw.

This was used to replace the indicator on my Craftsman 22400 bandsaw. The part JL20061008 is not made any more so i created a replacement. Use the dimensions to evaluate the possibility of this working on your saw -- perhaps with resizing on your bandsaw. I've also included the Fusion 360 Model if you want to customize it for your bandsaw. Check out the custom user parameters to get you started with basic measurements. There is a photo of the old part (JL20061008) to show you what this replaced.

The indicator has a slightly oval shape for the screw hole. This is so you can fine tune the accuracy. Set the blade a known distance from the fence. Then make sure that the indicator matches what is actually the distance. Once they are the same, screw it down tight.

Features

Easy to use and adjust
No assembly
Simple and fast print
Small ridge edge rides along fence to prevent it from sliding side to slide
Resize with your slicer if desired!
Dimensions: .78""w (20mm) x 1.65" l (42mm) Thickness 0.09 (2.18mm)
Distance from Ridge To Screw hole middle 0.3" (7.75mm) Screw Opening 0.17" (4.3mm)