VIM便携设备外壳

VIM Handheld device enclosure

2023-08-27 00:56:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

VIM Handheld Case

This is a custom made case design for your VIM with added support for 18650 batteries for on the go usage.

The display mount is catered to support the TS050 display that is compatible with your VIM devices out of the box.

To assemble you will need 6x 10-15mm M2 screws

There are two variants of the model,
regular model: holds 2 18650 cells.
NB (no battery): can still hold 1 18650 but its the smallest version.

Models consists of two parts, the body and the cover, check the images to see the most preferred way to print them, with minimal support material.

Note!: the NB and normal version do not have the same cover plate, so make sure you download the appropriate cover!.

Assembly:

Attach the display first, folding the FPC cable half way and routing the rest through the slot in the body and seating the display firmly on the display side.
connect the VIM to the FPC cable and seat it in the carriage.
Place all your power circuitry and batteries, and connect the VIN port to the device.
optionally add a piece of foam tape inside to hold the part steadily, and to secure the coverplate, fasten with m2 screws.