CineLog35 速度与精度结合的3D模型优化

CineLog35 speed conversion

2024-04-17 08:14:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

3.5" rocket dragster quad built around the bottom plate of some random cinewhoop (cinelog 35) because i didn't feel like cutting a monoplate for something so simple. Recommend dremeling off the excess carbon bits like i did.

Arm aero and inner mount held on with double sided tape. battery held on with ummagrip lite and a rubber band. rocket canopy held on with a single rubber band on one of the arms for a quick release. camera angle is 65 degrees. cam, gps,rx, vtx all held on with double sided tape.

The battery bay is sized specifically for an r-line 6s 550.
The camera mount is sized specifically for a caddx ant lite.
The gps mount is sized specifically for a goku gm10 nano.
Deviate from this BOM at your own risk.

I printed out of petg but lightweight pla would be better.