优势视界鸟巢环

Vantage Vue Bird Spike Ring

2024-01-17 08:53:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Bird spike ring for the Davis Instruments Vue ISS.
This replaces the stock debris screen for the rain collector and uses it as part of the ring's anchoring mechanism. No adhesives required!

Supplies Needed:

Uses 8 of the Davis 7353.274 bird spikes.

Print using a UV resistant filament. ASA is the best for this purpose as this is also the same material that the ISS itself is made out of. PETG will also work. Do not use PLA.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament brand:
Any
Filament color:
Any
Filament material:
ASA / PETG
Notes:
Print with the flat face on the printing surface. Supports are required for the center arms/spike section. Lower your overhang detection angle and print with walls inside to outside first for overhang quality. The debris screen does not need support so place a support blocker there. Use at least 3 walls.

Post-Printing

Assembly

The holes for the bird spikes are designed to securely hold them in place without adhesive much like the Davis Aerocone does. Due to variances in 3D printers, it is possible that the diameter of these holes might be too tight to fit the spikes and the holes may require enlargement with a small drill bit until they fit properly. If the holes are too loose, then adhesive may be required.

When inserting the ring onto the ISS, the small circle of the ring will insert snugly into the center circle present in the middle of the ISS. The ring will then snap into the drainage hole of the rain collector.

Exercise caution when inserting the ring into the ISS. If excessive force is used when inserting the ring, the "fingers" for the debris screen may break, reducing the effectiveness of the ring's anchoring system to the ISS.